Following the sampling activities of different matrices

3) Monitoring of Air quality

Air Quality Monitoring with Mobile Laboratory for the collection of continuous data

Continuous monitoring, with the use of "Mobile Laboratories" for air quality in relation to construction activities and relative modelling work for the impact assessment. Continuous determination, 24/24 hours, of CO, NO-NO2-NOx, O3, SO2, Total PM, PM 10, PM 2,5, Methane Hydrocarbons HC/NMHN and non-Methane BTX, meteorological parameters.

Mobile Lab

Data gathered

Monitoring of PM 10, PM 2,5, PTS

Air Quality monitoring for PM10, PM2,5, PTS by Sequential automatic sampler (Skypost)

For the monitoring of PM10, PM 2,5 , PTS is possible using a Sequential automatic sampler (Skypost) that working continuously, using one filter per day. At the end of monitoring all filters sampled will be delivered to the laboratory for analysis and then weighed with an analytical balance.

Air Quality monitoring for NOx by passive sampler for some days or weeks

The passive sampler is equipped with a radial symmetry system in which an adsorbing cartridge is inserted specific depending on the pollutant of interest. The diffusive body in radial symmetry containing the cartridge is fixed to a polycarbonate support plate, fixed inside of the room air on supports at a height of protective box specially designed, and exposed between 1.5 and 4 meter above the ground level. The passive sampler is analyzed in the laboratory to determine the amount of NO2.

Monitoring of NOx

Collecting of air sampling

Air Quality monitoring for measures Odorimetric

Monitoring of air from the biofilter

Measurement of different analytes (PM10, PM2,5, PTS, NH3, SOV, etc) from the biofilter by hood for conveying the air.

Monitoring of air quality

Determination of CH4 and
CO2 concentration present in
"Biogas" collection wells by
portable analyser at the
Landfills

Monitoring of Biogas from landfill

Our Activities

Following the sampling activities of different matrices